It is a self-levelling 2 components product based on epoxy resins, selected pigments and aggregates, epoxy Pavi-NET forms a low-thickness and is very easy to apply.
The surface will be monolithic, perfectly sanitized, waterproof and aesthetically pleasing as well as extremely resistant to chemical agents.
WHAT IT’S FOR
Thick coating for floors subject to heavy usage.
It is used as coating for continuous floors found in workable rooms especially in the food industry, wine and pharmaceutical industries, decontaminable rooms, nuclear laboratories and wherever a perfect decontaminability is required.
METHOD OF USE
- SURFACE PREPARATION
Check that the floor to be treated does not have a rising damp of more than 4-5% by weight, to be determined using a specific hygrometric instrument.
The surfaces must be healthy, dry and free from oil, grease and pollutants. Any restoration of damaged parts must be carried out with specific mortars.
Prepare the substrate using mechanical treatment (shot peening or abrasive) and subsequent aspiration of the processing powders. Apply RASA-NET CEM (see relevant technical sheet) after drafting the FIBRANET mesh.
Alternatively, apply the EPOXY PRIMER H2O (consult the relative technical sheet).
- PRODUCT PREPARATION
EPOXY PAVI-NET is a two-component product to be mixed before use; pour component B into component A, making sure to clean the walls and bottom of the jar with a spatula. Mix carefully for a few minutes with a low-speed drill fitted with a spiral tip, until the product is perfectly homogenized.
EPOXY PAVI-NET can be applied with a normal or serrated steel spatula.
The final thickness shall not be less than 2 mm. For greater thicknesses add the product with MICROQUARTZ taking care not to exceed the resin/sand ratio of 1:0.5. Wash the tools immediately after use with epoxy diluent. Furthermore we recommend a surface protection, apply a two-component polyurethane / aliphatic paint (POLIURETANIK-FINISH consult relative technical sheet) after 18/24 hours.
The product should be spread evenly to a size of 2.5-3 kg / square m. After spreading the product pass the bubble breaker roller, the operator must put on the appropriate spiked shoes.